Toro Dingo High Torque Auger Power Head (22805)

Call for Price

Available on backorder

SKU: 22805 Category:

Available on backorder

Shop With Confidence

Free Shipping

On all orders over $100

Genuine Parts

Designed to fit your model

Model Compatibility

Toro Dingo High Torque Power Head

In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo’s capability to dig 30″ (76.2 cm) holes up to 6′ (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Single Directional Pivot

Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing.

Horizontal Lockout

The head locks in the horizontal position for usage with the Toro Cement Bowl, Capstand Adapter and more.

High Torque Drive

The high torque drive provides a tremendous 1515 ft-lbs of torque at 3000 psi with a bit speed of 57 rpm to break through the toughest ground.

Planetary Gear Drive

The plantetary gear drive provides high speeds and maximum torque to the auger, while transmitting minimal stress on the auger head components. The planetary gear drive insures the longevity of the hydraulic motor.

Auger Bits

Available in 6″ 9″ 12″ 15″ 18″ 24″ 30″ (15.2 cm, 22.9 cm, 30.5 cm, 38 cm, 45.7 cm, 61 cm, 76.2 cm). Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flightings are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro welds will not break under the same conditions. The Toro flighting is composed of 3/8″ (1 cm) thick continuous steel where many other augers are 1/8″ (3 mm) thick or less. The shaft of the auger firmly connects to the power head reducing “play” in the system and creating a longer lasting auger. This connection provides less “shock” to the power head, lengthening the life of the head and its components.
Weight and Dimensions
Weight 185 lbs
Non-Stock Item

Yes

No Hassle Returns

You may return parts and products for any reason within 30 days of the delivery date. All products must be unopened and returned in sellable condition. Return shipping including the purchase of shipping labels is the responsibility of the buyer. For your convenience, we offer the option to request a shipping label (the cost of shipping will be deducted from refund). The Mower Shop provides prepaid return shipping labels in the following cases: carrier damage, lost packages and incorrect items. 

Read Full Return Policy

Available on backorder