Available in store only.
Local delivery available.
Z Master Commercial 3000 Series mowers deliver impressive commercial-grade results and durability, all at an outstanding value. Powerful commercial-grade 22 HP Kawasaki® FX 726cc engine with 52" TURBO FORCE deck.
|Exclusive TURBO FORCE Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
|7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
|Industry's Toughest Spindle Assemblies
Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
|A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
|Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
|Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
|Convenience and Comfort
Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.
22 HP* Kawasaki® FX 726cc
|Fuel Capacity||Gasoline - 8 gallons|
|Adjustable Discharge Baffle||Standard|
|Air Filter||Heavy-Duty Canister|
|Anti-Scalp Wheels||3 Standard, 1 Optional|
|Blade Tip Speed||18,300+ ft/min (5,577.8 m/min)|
|Blade Type||.25 in (.6 cm) thick heat-treated steel|
|Carrier Frame||3" x 1.5" x 10 gauge|
|Caster Tires||13 in x 6.5 in - 6 in -pneumatic|
|Deck Design||7-gauge 52 in (1.3 m) TURBO FORCE® w/ bull-nose bumper|
|Drive Tires||23 in x 9.5 in -12 in (58.4 cm x 24.1 cm - 30.5 cm)|
|Ground Speed||8.5 mph forward|
|Height of Cut||1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments|
|Hydraulic Fluid||Premium Synthetic|
|Spindle Bearings||Greasable ball bearings|
|Spindle Housing||9 diameter cast iron|
|Steering Controls||1-5/8 in (4.1 cm) diameter grips; adjustable, dampened|
|Disclaimer||*The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.|